MYC-100A Automatic High Speed Paper Cup Making Machine

it is with auto paper fan feeding unit , PLC control system, bottom is sealed by Swiss Leister hot air device . photo detecting system ensures the bottom is without leakage , auto oil lubrication can ensure all mechanical parts work smoothly and it can stop working automatically if the sensors detect failures, it can greatly improve operation safety.
MYC-100A Automatic High Speed Paper Cup Making Machine
MYC-100A Automatic High Speed Paper Cup Making Machine
MYC-100A Automatic High Speed Paper Cup Making Machine
MYC-100A Automatic High Speed Paper Cup Making Machine
Send a quote Specs PDF
Max Speed
Paper Cup Size
6~16 OZ,16~22 OZ
Model MYC-100A Automatic High Speed Paper Cup Making Machine
Paper Cup Size 6~16 OZ     16~22 OZ
Rated Speed 120-160pcs/min ( Speed affected by cup size, paper quality & thickness)9OZ.280GSM paper cup Stable running speed 120 pcs each min.
Raw Material One or Two side PE coated Paper(Popular for Hot and Cold drink Cups)
Suitable paper weight 140-350gsm
Power Source: 50/60HZ,380V1220V( better use 380V,3 Phase )or special Power requirement.
Total Power 10KW
Total Weight 3600KG
Pack Size(LWH) 2730*1600*1800mm
Working Air Source Air pressure:0.4Mpa:

Air Out-put:0.6m/minute

Need to buy Air Compressor(by user)

Cup Side Welding Ultrasonic heater
Cup Bottom Heating 1side PE paper by heater knurling;

2side PEpaper by cool device (circle water) knurling

Cup Bottom Knurling Heater Knurling (if use single PE coated paper)
Customer Case
MYC-OCM100 copper heater paper cup machine

Country: Senegal

Solution:MYC-OCM100 copper heater paper cup machine 

Requirement Size: 3OZ

MYC-OCM12 Intelligent model paper cup machine

Country: Senegal

Solution:MYC-OCM12 Intelligent model paper cup machine

Requirement Size:Single Wall Paper Cup 4OZ and 6OZ

View More Cases
FAQ of Paper Cup Machine
Q:1.How will the machine be repaired if there are faults, andwhat is the warranty?

Our engineer team will send the operation video to guide you tcsolve the problem .if the spare parts is broken in the warrantyperiod, we will send you the new replacement parts for frec.

Q:2.What is the raw materials for the paper cup machine ?

Raw materials : Single /double PE coated paper fan which isalready cut and printed , bottom paper roll

PS: Machine is without printing and cutting function(onlycan cut bottom roll paper, it can not cut the paper fan )

Q:3.One machine is with just one mould or several mould? Can we make difference size of the cup in one machine?

One machine is installed one full set mould for free. You canbuy extra half set mould (easy to change) or full set mould(difficult :1% success rate). We only recommend to change1-3 sets half set mould (with same bottom diameter size)in one machine.

Q:4.What else we need to start the production ?

Food grade or silicone oil and a small air compressor.

Q:5.How can I install the machine and get training servicesin my country?

The machine will be finished installation and tested runningperfectly before the delivery . You will get the completemachine which is finished installation. We will provide the fulloperation and training Videos to guide you to run the machineAnyone can install the machine and operate it easily.


Through this video, we will show you the paper cup manufacturing processand superior performance of 100A. This machine can produce cupsranging from 6 to 22 ounces, meeting various size requirements.

More videos
Product features

Electric System

Quality Brand electric System like mitsubishi, Schneider.PLC controlsystem be with mitsubishi Brand Made in Japan with Reliable quality.

Schneider Touch Screen

lt adopts PLC controller and touch screen (man -machine interface)all the working parameters can be setup on the control panel whichisconvenient for parameter settingand adjusting.(easy operate)

Swiss Brand Hot Air Heater 2 pcs

The molds with sleeve and bottom will be heated twice by the hot airguns. And then the end of the sleeve will be pre-folded inward to get ready for seaing with the paper cup bottom.

Bottom Knurling And Sealing Unit

New separate moving knurling unit design can increase the runningspeed and make bottom knurling perfectly without leakage.

High-precision Transmission System

All transmission mechanical parts are strictly selected from specificmaterials, and have undergone specific processing processes suchas surface phosphating, blackening, carburizing and quenchingand curve grinding to ensure that the machine has good stabilityand service life after careful assembly.

Rotary Robot Hand Feeding Cup Body

Three rotary robot hands catch and feed cup body to the mould inhigh efficiency and accuracy.

Oil Pump Motor

The whole machine is equipped with automatic lubrication systemwhich makes all mechanical parts working much more smoothly.