MYC-120 mechanical double disc design ultrasonic paper cup machine

Min. /Max. Size：

PAPER CUP FORMING PROCESS：

Paper cup production line flow chart：

printing press-die＞＞cutting machine＞＞Paper cup machine ＞＞Paper cup packaging machine

Machine structure：

Technical Features:

1. Double turntable design: The top edge roll and bottom seal are designed separately, which greatly improves the stability of the machine.

2.10 mold heads: The overall mold head uses 10 molds and is made of aluminum material. Compared with the single board, which only has 8 phenolic separable materials, the finished paper cup is not easy to get dirty.

3. Robot hand cup feeding device: 4-in-1 rotating manipulator cup feeding device makes the machine run more stable and faster.

4. Bottom hot air heater: The double turntable adds 4 sets of hot air blowing systems, soft paper fans, and bottom paper. The bottom paper is heated twice when the machine is running at high speed, so that the quality of the finished paper cup is better and there will be no water leakage problem.

5. Touch screen: Using PLC controller and touch screen (human-machine interface), all working parameters can be set on the control panel to facilitate parameter setting and adjustment. (Easy to operate).

The main function:

1. Bottom paper feeding and punching unit: The bottom paper feeding and punching are controlled by two servo motors, which ensures more accurate bottom paper feeding and cutting, greatly saving bottom paper.

2. Bottom waste paper conveyor belt: The bottom paper will be transported through the conveyor belt and discharged. There are fewer problems with waste paper jamming on the bottom paper.