3PLY Face Mask Body Forming Machine

3PLY Face Mask Body Forming Machine

  • 3PLY Face Mask Body Forming Machine
  • 3PLY Face Mask Body Forming Machine
  • 3PLY Face Mask Body Forming Machine
  • 3PLY Face Mask Body Forming Machine

Service Online

Product Description

Sample Pic Which Made by 3Ply Mask Body Machine:

3 PLY Raw Material Report

Items PP Nonwoven Fabric Melt Blown filter paper PP Nonwoven Nose Piece Elastic ear loops
Picture

Specification

Width: 17.5cm

Outer ply blue/green/white/pink/yellow 20GSM

Width:17.5cm

middle layer  weight :20GSM

Width: 19.5cm

Inner ply

(touching skin) white weight:25GSM

Width: 3mm

thickness :1mm

Length:95mm

Width: 2.5mm

Length: 20cm

Progress Step For 3Ply Face Mask 

Technical parameter

Product Name 3 Ply Mask Body Forming Machine
Raw Material Non Woven Fabric, Melt Blown Fabric, Nose Piece
Dimensions 3650*730*1830MM
Voltage 220V/380V,50/60hz
Power 2.7KW
Output: 120-150 Pcs/min
Weight 850 KGS
Control Mode PLC and Touch Screen
Container Request 1*20” GP(One Set making machine two sets point welding machine)

1. Cutting Roller device which is made by Steel is more durable, and easy to change the Knife.

2. Traction Roller: We use silicone rubber materials instead of butyl wax materials. Silicone rubber materials have good abrasion resistance and will not crack.

3. Mask Embossing Roller Device is for edge embossing pressing and wheel roller welding ..

4. Embossing roller edge welding and cutting roller unit

5. Touch Screen Controller: It adopts PLC controller and Touch screen, all the working parameters can be setup on the control panel which is convenient for parameter setting and adjusting.

6. Nose bridge bar roll storage unit which is used for storing the nose bridge bar roll .

7. Nose bridge bar feeding and cutting device
The nose bridge bar directly feeding and cutting device ensures that the nose bridge bar can be inserted more straight during the processing, so the finished mask blank will be flat and beautiful. The tension of feeding and cutting device can be adjusted to avoid different lengths of nose bar .(keep same length)

8. Photoelectric Sensor Detecting raw materials, to avoid mistakes, reduce waste. Once the raw materials are consumed (used up), the machine will automatically stop.

9. Electrostatic Eliminator
There is an electrostatic eliminator which is used to eliminate static electricity on the surface of non-woven masks in machine

10. The 20KHz ultrasonic system is more quieter and can meet various materials welding requirements.

Free Spare Parts List 

No. Name Quantity Picture

1

Adjustable spanner

2PCS

2

inner hexagonal spanner

1SET

3

Screwdriver(+ -)

1 SET

4

Operation & Maintenance CD

1PC

5

Non-woven cutting blades

2PCS

6

steel wire

20PCS

7

Nose bar blade

1PC

8

belt

1PC

Message Feedback
News