3 PLY Face Mask 1+1/1+2 Type Production Line

3 PLY Face Mask 1+1/1+2 Type Production Line

  • 3 PLY Face Mask 1+1/1+2 Type Production Line
  • 3 PLY Face Mask 1+1/1+2 Type Production Line

Service Online

Product Description

Sample Pic Which Made by 3Ply Mask Body Machine:

3 PLY Raw Material Report

Items PP Nonwoven Fabric Melt Blown filter paper PP Nonwoven Nose Piece Elastic ear loops


Width: 17.5cm

Outer ply blue/green/white/pink/yellow 20GSM


middle layer  weight :20GSM

Width: 19.5cm

Inner ply

(touching skin) white weight:25GSM

Width: 3mm

thickness :1mm


Width: 2.5mm

Length: 20cm

Progress Step For 3Ply Face Mask 

1+1 Type 3PLY Face Mask Production Line

Products Description:

1. The whole roll of fabric is driven by rollers after unwinding, and the fabric is automatically folded and hemmed
2. Bridge of nose strip whole roll traction unroll, cut to length and guide into hemmed fabric. Two sides Ultrasonic welding to the seal, then ultrasonic 2 ends sealing, cutting and shaping by a cutter, conveying the mask to the two mask ear band welding stations through an assembly line, and finally forming the mask by ultrasonic welding
3. when the mask is made, it is transported to the flat belt line for collection. 
4. Complete line include 1 set mask body making machine and 1 sets ear loop automatic welding machine.

Technical parameter

Model 1+1 Type 3PLY Face Mask Production Line
Control type PLC 
Speed 40-60pcs/min
Air pressure ≥0.6Mpa
Dimension 4400mm(L)*2850mm(W)*1800mm(H)
Voltage single phase 220v /can customize
Total Power 7.8kw
Raw materials

non-woven fabric (20-25g/m2)

melt-blown filter fabric (15-30g/m2)

single/double iron wire nose bridge bar / aluminum strip

 Ear elastic loop

Specification of masks: 95*175 mm or other size  , three layers
Delivery time 15-20 days
Packing size 2300*1200*1500mm,1900*1200*1850mm

1+2 Type 3PLY Face Mask Production Line

Full-automatic face mask machine one to two Production Lines, The face mask blank machine is connected with a separating machine. After the separating machine is connected with the two ear loop welding machines, when the machine start the conveyor belt is conveyed to the separating machine , and t separating machine transfers the mask to the ear loop welding machine to complete the welding of the ear loop part of the mask. The entire process realizes a fully automated production process without manual operation. in other words, One Face Mask Making Machines connected to two ear loop welding machines, and the production capacity can reach 100-120pcs/min

This production line realizes the full automatic production of plane mask, mainly including the nose bridge coil material feeding, folding and pressing, nose bridge feeding, mask shaping, mask cutting, ear loop welding, and finished product blanking, etc., to complete the whole production process from raw material to finished mask.

Technical Parameter

Model 1+2 Type 3PLY Face Mask Production Line
Control type PLC 
Ultrasonic frequency 20KHz
Detection mode Photoelectric detection

220V Single Phase ,

380Vthree phases 50/60Hz /can customize

Air pressure ≥0.6Mpa
Dimension 6700*3100*1680mm
Voltage single phase 220v /can customize
Total Power 11kw
Servo motor power 1.3kw
ear-band part power 0.75kw*2
conveyor belt motor power 0.09kw*3
Material Stainless steel
Capacity 100-120pcs/min
Machine weight 1700kgs

1. Mask Body Machine and Ear Loop welding Machine connect parts by PLC control and Touch screen operation (English language in bulid), all the working parameters can be setup on the control panel. Easy to operate and adjust the parameter

The blank mask separating machine

2. Mask body two times reversal is controlled by PLC controller and driven by Servo motors ,which is more reliable and more accurate , high degree of automation.

3. Transmission Conveyor unit

Free Spare Parts List 

No. Name Quantity Picture


Adjustable spanner



inner hexagonal spanner



Screwdriver(+ -)



Operation & Maintenance CD



Non-woven cutting blades



steel wire



Nose bar blade





Message Feedback